Conveyor for Loose products of Beans & Pulses

To fabricate a flighted belt conveyors with infeed hopper and protective panels that prevent any over spills and loss of products.

Click to Call Tel: 01525 850316

Video of Belt Conveyor transporting loose pulses

Conveyor Description

To manufacture an inclined, flighted belt conveyor taking loose pulses, hand loaded, to a hopper for further processing.

Belt Conveyor for Pulses Design Information
Product:	Range of Dry Pulses, typically kidney beans in 25 kg bags
General Density:	380 gms = 500 ml
Throughput:	15 kg/min     Belt Speed:    5 m/min fixed
Height of Hopper:	2700mm

Elevating Belt Conveyors Operation details

1 off Flighted Inclined Belt Conveyor being 300mm wide x 4000mm long inclined at 45 degrees.

The height range is 250mm to 3200mm. The belt was supplied with 70mm high flights which were angled forward at 15 degrees@ 200mm pitches and has a central vee track guide.

Fixed side guides 100mm high run the length of the conveyor, tight against the belt edge. Fixed under guards were also included.

There is a fixed integral hopper approx 500mm x 500mm x 500mm at the infeed with a lip height of 900mm.

Along the inclined section there are bolt on clear 6mm polycarbonate covers.

Product is received from hand loaded bags or boxes into the hopper, product is then discharges into an existing hopper for further processing.

The conveyor was mounted on a box section frame with adjustable out rigged braked castors +50mm for stability 600mm wide.

A fixed speed shaft mounted geared motor drive was included. It comes complete with a control panel, including stop/start/isolator and facility to link to existing discharge level probe was included.

General construction is st st grade 304 with food quality materials where possible.

More images of other loose troughed conveyors